There are several “do it yourself” air conditioning installation programs provided through the net, some of which are very valuable and others that offer just the very fundamental steps for installation. It is necessary to keep in mind that incorrectly doing your air conditioning installation can wind up costing you more money in the long run, so make certain to clarify any concerns and entirely understand the process before you begin.
The first step in completing your air conditioning installation process is to entirely review the manufacturers handbook. You will need to be trained and accredited in dealing with the refrigerant or coolant, or you will need to contract with someone to do this step. In addition, if you are not an electrician, it is always best to have an expert complete this step so you dont wind up wasting time and money later when the structure is inspected. If you need to obtain any permits, make certain to do so prior to beginning the air conditioning installation.
Make certain that you have all the essential supplies before beginning the job. This includes tools, the cooling unit itself, ducts and hangers and other devices or supplies required as per the manufacturers directions and your own particular structure. The next step is to find the outdoor part of the unit on level ground, preferably in a shady area, near the house and at least three feet from an electric or gas meter as per building codes in your area. Have a concrete pad to position the unit on and fasten as required Air Conditioning Service San Diego CA . A small opening is then drilled through the wall to allow electrical wires and pipes to stretch from the internal to external unit.
Place the internal unit in the plenum above the furnace as per the manufacturers directions. Connect the suction line that will carry the moisture between the inside unit and the condenser on the exterior. At this point the high voltage connects have to be made by an expert electrician. There are likewise low voltage wires that will need to be connected, these can be done by the electrician or by the homeowner as per the air conditioning installation directions provided.
